Model # 74

Manhasset^® now provides a much improved neck attachment on our music stands. It is made of a high quality glass-filled nylon. The new neck has far superior memory and phenomenal shaft adhesion compared with the earlier one. In addition, it now only takes a screwdriver to connect the desk to the shaft.

The ultimate in attractive design and simplicity. Features include glare-free, full-width, audience-shielded illumination. It has ample clearance of even the taller scores of music, and dual clips for assured attachment, yet easily installed and removed. Complete with 40-watt bulb, 8-foot cord, and switch. Durable black enamel finish. Rigorously inspected and tested, this lamp is ETL and CSA approved, and is designed for years of trouble-free service.

Model #1000

Accessory Shelf provides storage at your fingertips! This durable ABS plastic shelf slides onto the ledge of your stand, instantly converting it to a double lipped orchestral stand. This shelf that is 16 inches long, provides convenient storage for your music paraphenalia.

Model #1100

Model #1200

A transparent, highly durable plastic clip that makes playing in the wind a breeze. MusiClips clamp over the entire length of your music for a firm, secure grip. They eliminate unsightly and awkward clothespins or fasteners, making page turning much easier. MusiClips accommodate large collections of music and fit all music stands.

An adjustable holder for violin and viola and bows. Clips on the lip of all folding and concert music stands. Holds violin or viola and bows securely. Stores conveniently in the case.

Model #1300

Model #1320

Clips on the lip of all folding and concert music stands. Places mutes or cups in convenient, readily accessible place. Allows for quick mute changes during performances.

This unique device converts the base of a Manhasset^® Music Stand into an amazingly stable and secure location to hold your instrument using a peg or pegs for flute, piccolo, oboe, clarinet, recorder (sopranino, soprano, alto, tenor, F bass) or trumpet. With the Dual Peg Adapter, one stand can holds pegs to accommodate three instruments. A must for all wind instrument players. All peg accessories (listed below) sold separately.

Wind Instrument Stand shown here with the # 1440 Flute Peg and Flute

Model #1400

A music folder which extends the desk width of any music stand to a full 34 inches -- wide enough to hold 4 pages of music. Folds into standard width when not in use as an extender. Elastic security band holds folder snugly to music stand. Works equally well on piano, organ or synthesizer. Made of durable, heat-sealed class 100 vinyl with 80 pt. chipboard core.

Model #1650

Model #1670

This is a great tool for the music teacher or those who have a combination of older (pre-1995) stands and newer stands. It incorporates both size sockets used to install/tighten the bolt that attaches the base to the shaft (a 9/16-inch one for the older and a 17mm socket for the modern stands. Even if your band room includes all old or includes all new stands, this wrench is still a valuable tool for conveniently taking care of installation and/or maintenance tasks. The handle length is sized to provide the right leverage to easily tighten the bolt.

The Manhasset^® Floor Protectors protect against those expensive to repair scratches, marks and gouges in wood or tile floors. Each vinyl protector slips easily onto the base "toes" and stay firmly in place to prevent any unnecessary scratching of floor surfaces. Excellent for use in gymnasiums, on stages, churches or anywhere floors need to be protected from stand use. Works on all standard Manhasset^® bases.

Model #1700

Model #1800

An excellent compliment to the portability of the Voyager Music Stand, this durable nylon tote bag is designed to efficiently transport your Voyager Stand. It features a comfortable shoulder strap and provides ample room for books or sheet music, or personal effects.

The Harmony Stand Cart, with its horizontal rail framework, is designed to hold 15 of the horizontally stacking Harmony music stands. In addition to their ability to be stored using very little space, now with this Harmony Stand Cart, we can now offer ease of portability for this stand. Since this cart has an overall length of less than 5 feet, it can easily fit in most elevators. It is made to the same strict standards and of the same high quality as Manhasset^®'s other storage carts. With its welded steel construction and durable powder coated finish, it will provide service for years to come.  Not intended for outdoor use.

Model #1980

Model #2800

This Accessory Box will finally allow musicians to have the music stand storage they have needed. The box dimensions are 10 inches long by 6 inches wide and it has a box depth of 2-1/2 inches - so it will hold all the supplies and accessories (such as pencils, valve oil, mouth pieces, rosin, cleaning supplies, reeds, and you name it) you have to have - and at a "no-reach required" convenient location, right below the music stand desk. In addition it has a built-in holder for your water bottle or cup, as well. The unit's hanger is designed to fit on any Manhasset^® music stand and provide a securely fitting container unequalled in accessibility and convenience. This Accessory Box unit can be installed in an instant and removed just as easily.

Our standard shaft easily holds 8 lbs. However, for applications requiring greater weight carrying capacity, our Shaft-Lock fits the bill. It is easily retrofitted onto all Manhasset^® music stand shafts, instantly allowing you to have your stand (shaft) support up to 75 lbs. With its fingertip twist mechanism, you can quickly adjust and lock the height at any position. In the unlocked position, the music stand is allowed to function in the normal fashion.

Model #2400

Model #2600

When you need to hold a desk in a stable horizontal position, the Table-Lock is the answer. The Manhasset^® Table-Lock is ideal for converting Manhasset^® music stands for use with synthetic drum pads, keyboards, or other applications requiring a flat platform. In moments, this accessory can be fitted on all standard necked Manhasset^® music stands (all except the voyager portable stands). With only two screws, your stand is converted to a table platform that is locked in the horizontal position.

The features of this Microphone Stand make it the right choice for musicians and vocalists. It includes a connecting adapter made for the most popular mic holder's thread size. The height adjustment ranges from 38" to 64" - providing the ideal height for virtually all applications. Portability of this Microphone Stand is unbeatable. Instead of using a heavy base, it utilizes a collapsible tripod base for amazing stability. Weighing less than 2.7 lbs., it can be easily transported and stored. Also, with the same Magic Finger Clutch used in our music stands, the height adjustment can be easily made with just one hand. In addition, by using the same look as our music stands, it conveniently blends and fits with Manhasset^® music stands.

Model 3000

Model #3000

This shorter version of the Microphone Stand has all the same features and benefits. The height adjustment ranges from 18" - 30", making it perfect for lower setting needs. This Concertino Microphone Stand is perfect for seated musicians including acoustic guitarists, cellist and harpist.

We are pleased to introduce Manhasset^®’s New Acoustic Shield.

The 22" high by 26" wide shield is made of clear, durable Lexan polycarbonate. It is designed to effectively provide hearing protection to the musician stationed in front of other musicians, yet not causing impaired vision for the musician behind.

The unit’s height adjustment range will afford protection for the musician while sitting and, since, when extended, it has a height of 66 inches, it can also provide hearing protection to the standing musician. In addition to offering hearing protection for musicians playing in front of loud instrumentalists, shields can be easily positioned around percussion sections to reduce the hearing impact on other musicians. Beyond the benefits of acoustic shielding, this device also functions as deflector for french horn players, when placed behind the bell.

The shield contracts and folds down to a height of 37" allowing it to be comfortably tucked away behind your chair when not needed. Also, the shield is equipped with a collapsible tripod base that makes it very portable and easily transported.

The Manhasset^® Acoustic Shield also has a 1 1/2" ledge, so it easily doubles as a fully-functioning music stand for directors or those desiring a larger music desk, yet not wanting to sacrifice visibility.

Model #2000

---

 

Model #3200-U

• #3200-U (fits on a Manhasset^® music stand shaft) and #3200-UM (for mic stands).
• The Manhasset^® Universal Tablet Holder is adjustable so it will fit all sizes of tablets up to 12.5".
  • The model 3200-U combined with your tablet and professional software transforms a Manhasset^® music stand shaft/base unit (sold separately) into a digital music stand - bringing music and technology together.
  • The Tablet Holder's "V" shaped lower support holds the tablet firmly and securely, and the upper hook and twist-lock easily secures it in either orientation - portrait or landscape. The orientation can be changed quickly if desired.
  • The tilt mechanism permits one-handed adjustment of the tablet's viewing angle. When used with the Manhasset^® shaft/base combination, the tablet can be positioned anywhere from 32" to 55" high (center of Tablet Holder).
• The Manhasset^® Universal Tablet Holder is made in the USA and made of high quality injection-molded ABS and Glass-filled Nylon.
• One (1) year warranty.

---

 

• #3200-UE Manhasset^® Universal Tablet Holder with 8" Extension Arm (extension arm to fit onto any music stand shaft or mic stand).
• The Manhasset^® Universal Tablet Holder is adjustable so it will fit all sizes of tablets up to 12.5".
• The Manhasset^® Universal Tablet Holder is made in the USA and made of high quality injection-molded ABS and Glass-filled Nylon.
• One (1) year warranty.

---

• #3300 Manhasset^® Universal Tablet Holder with base and shaft is made for long-lasting performance in the USA and produced of high quality injection molded ANS and Glas Filled Nylon.
• One (1) year warranty.

Model #3200-U